[CA] [CA11] Axiom Pro RVX to E97 Transducer

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum firstin,

Please note that Raymarine 600W & 1kW 50kHz/200kHz transducers which were designed to be mated directly interfaced (i.e. no adapter cable used) to any of the following fishfinder sounder modules may be adapted (via part #A80496) to be mated to the 1kW transducer socket of an Axiom Pro RVX MFD:
- CP370
- CP300
- DSM300
- DSM30

However, Raymarine 600W 50kHz/200kHz transducers which were designed to be mated directly interfaced (i.e. no adapter cable used) to the Transducer socket any of the following MFDs may be adapted via an adapter cable to the 1kW transducer socket of an Axiom Pro RVX MFD. In order to use such a transducer, the transducer would need to be interfaced to a CP370 Fishfinder Sounder Module, which in turn would be interfaced via Ethernet network (RayNet / SeaTalkhs) communications to the Axiom Pro RVX MFD.

If supplied with a photo of the B744V's transducer tag showing all information which has been printed on the tag, then it may be possible to determine which variant of the B744V transducer is currently installed and then which of the above listed options may be used.