[CA] [CA11] GS16 - Lighthouse/Bermuda Update

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum aurora37,

The compressed folder which will be downloaded should be saved to the computer, not to the microSD memory card. The compressed folder should then be opened. Within it, two .iso file will be found ... one to update to the LH3 base maps (cartography ... you will find this within the file's name) and one to update the LH3 software. One of these .iso files will be copied to the root level directory of a microSD memory card and the second .iso file will be copied to the root level directory of a second microSD memory card. After doing so, the microSD memory card containing the LH3 software update will be inserted into the MFD's memory card reader and the MFD will be commanded to check the card for updates. Upon completing the LH3 software update, the microSD memory card will be ejected and then the microSD memory containing the base map updates will be inserted into the MFD's memory card reader and the MFD will again be commanded to check the card for updates. The MFD may report that this update has already been installed. However, the MFD should be commanded to proceed with the update.