The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Dragonfly 7 install

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dragonfly 7 install
05-26-16, 09:52 AM
Post: #1
BAMA Offline
Junior Member
**
 		Posts: 1
Joined: May 2016
Reputation: 0
Dragonfly 7 install
I have a Dragonfly 7 Pro with a CPT-DVS transom transducer I need to install on a Chaparral SSi 204 I/O. Looking for any suggestions. I've been debating install on port side in the step beside the sterndrive similar as the speed pickup on the starboard side? The manual instructs to mount on starboard with the clockwise rotating prop, however, I wonder if it will make any difference in this application? Also, have never drilled thru anything on a boat, does anyone have advise on drilling thru hull to route the cable, similar to how the speed hose is routed? I assume it would require a pretty big [censored] like 5/8" or better to get the connector end thru?
Thanks,
Mike
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Dragonfly 7 install - BAMA - 05-26-16 09:52 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication