Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] I50 and I60 compatible with my present hardware?

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] I50 and I60 compatible with my present hardware?
09-26-19, 01:37 PM (This post was last modified: 09-26-19 02:15 PM by Chuck - Raymarine - Moderator.)
Post: #7
udo Offline
Junior Member
**
 		Posts: 8
Joined: Jul 2019
Reputation: 0
RE: [CA11] I50 and I60 compatible with my present hardware?
One more little thing:

When I look at the specification from the I60 and I70, then I see on the drawing that the cable on the I60 needs 25mm and on the I70 90mm, whilst both are spur SeaTalkng cables. Can you explain?

and if I would use the A06081 Raymarine SeaTalk NG Spur Right Angle Adapter:, how much space is needed in that case?

I need to know, because I have limited space behing my existing devices, which I intend to replace.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] I50 and I60 compatible with my present hardware? - udo - 09-26-19 01:37 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication