Raymarine forum / Raymarine Forums / Product and Feature Suggestions v / [CA] [CA11] Mirror master MFD to slave

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Mirror master MFD to slave
10-24-19, 01:31 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Mirror master MFD to slave
Welcome to the Raymarine Forum Wdeertz,

Networked MFDs running LH3 software are designed to share pages. Please ensure that your MFDs are operating with the latest LH3 software update. If so, and the same page icon has been selected from the Homescreen to be displayed on each MFD and the symptom persists, then please identify the type of cartography being used within the system and at least one configuration setting which you are finding is not common between the instances of the Chart application.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Mirror master MFD to slave - Chuck - Raymarine - Moderator - 10-24-19 01:31 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication