European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[TG] [TG11] eS127 re-boot using LH 3
|
|
11-26-19, 09:16 PM
(This post was last modified: 11-27-19 11:50 AM by Chuck - Raymarine - Moderator.)
Post: #7
|
|||
|
|||
|
RE: [TG11] eS127 re-boot using LH 3
The waypoint aren’t the issue. The route name is the issue. I suspect you may be right about Navionics truncating the route name.
I am using 3.11.42. Plotter sync was working on the previous version which was put out in late September. It has not worked with 3.11.42. The routes that were transmitted with plotter sync were transmitted with the previous version. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[TG11] eS127 re-boot using LH 3 - nharrison5 - 10-30-19, 06:13 PM
RE: [TG11] eS127 re-boot using LH 3 - Tom - Raymarine - Moderator - 11-07-19, 12:36 AM
RE: [TG11] eS127 re-boot using LH 3 - nharrison5 - 11-16-19, 10:20 AM
RE: [TG11] eS127 re-boot using LH 3 - Tom - Raymarine - Moderator - 11-19-19, 11:37 PM
RE: [TG11] eS127 re-boot using LH 3 - nharrison5 - 11-23-19, 09:39 PM
RE: [TG11] eS127 re-boot using LH 3 - Tom - Raymarine - Moderator - 11-26-19, 08:53 PM
RE: [TG11] eS127 re-boot using LH 3 - nharrison5 - 11-26-19 09:16 PM
RE: [TG11] eS127 re-boot using LH 3 - nharrison5 - 12-10-19, 12:37 AM
RE: [TG11] eS127 re-boot using LH 3 - Zonefive1 - 12-07-19, 11:58 PM
RE: [TG11] eS127 re-boot using LH 3 - Tom - Raymarine - Moderator - 12-09-19, 09:11 PM
RE: [TG11] eS127 re-boot using LH 3 - Tom - Raymarine - Moderator - 12-16-19, 11:02 PM
RE: [TG11] eS127 re-boot using LH 3 - nharrison5 - 12-17-19, 11:12 AM
|
User(s) browsing this thread: 1 Guest(s)