[CA11] connecting st60 wind to chart plotter a70D via seatalk NG or NMEA

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] connecting st60 wind to chart plotter a70D via seatalk NG or NMEA

11-25-19, 04:52 AM

Post: #3

adamcovell Offline

Junior Member

Posts: 12
Joined: Nov 2019
Reputation: 0

RE: [CA11] connecting st60 wind to chart plotter a70D via seatalk NG or NMEA

Thank you chuck that is very helpful . Have been banging my head against a wall for this for a while.

It seems then it would be best for me to purchase a newer wind display - the i60 wind display with the Seatalkng connections (rather than spend the money on the converter).

What I am not clear about is.. can the i60 then be daisy chained onto the i70 then back to the chart plotter all with Seatalk NG cables? Or would I need a separate 5m spur with a new connection into the backbone for the i60?.. hopefully not!

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] connecting st60 wind to chart plotter a70D via seatalk NG or NMEA - adamcovell - 11-22-19, 02:38 PM

RE: [CA11] connecting st60 wind to chart plotter a70D via seatalk NG or NMEA - Chuck - Raymarine - Moderator - 11-22-19, 03:55 PM

RE: [CA11] connecting st60 wind to chart plotter a70D via seatalk NG or NMEA - adamcovell - 11-25-19 04:52 AM

RE: [CA11] connecting st60 wind to chart plotter a70D via seatalk NG or NMEA - Chuck - Raymarine - Moderator - 11-25-19, 11:13 AM

RE: [CA11] connecting st60 wind to chart plotter a70D via seatalk NG or NMEA - adamcovell - 11-25-19, 11:18 AM

RE: [CA11] connecting st60 wind to chart plotter a70D via seatalk NG or NMEA - Chuck - Raymarine - Moderator - 11-25-19, 02:36 PM

User(s) browsing this thread: 1 Guest(s)