Raymarine forum / Raymarine Forums / Multifunction Displays v / Fusion RA 205 Connection to SeaTalk ng

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fusion RA 205 Connection to SeaTalk ng
03-28-16, 08:50 PM
Post: #1
PrimeTime42 Offline
Junior Member
**
 		Posts: 2
Joined: Mar 2016
Reputation: 0
Fusion RA 205 Connection to SeaTalk ng
What cable (s) are required to connect a Fusion RA205's NMEA 2000 port to the SeaTalk ng backbone so I can control the Fusion audio with an e125 running LH 15?
Ken Reynolds
Prime Time 4 2
Yorktown, VIrginia
Find all posts by this user
Quote this message in a reply
03-29-16, 10:01 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Fusion RA 205 Connection to SeaTalk ng
Welcome to the Raymarine Forum PrimeTime42,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
03-29-16, 03:03 PM
Post: #3
PrimeTime42 Offline
Junior Member
**
 		Posts: 2
Joined: Mar 2016
Reputation: 0
Wink RE: Fusion RA 205 Connection to SeaTalk ng
Perfect. Thanks!
Find all posts by this user
Quote this message in a reply
04-01-16, 02:01 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Fusion RA 205 Connection to SeaTalk ng
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication