Using Axiom to update EV-100 Wheel pilot ?
|
07-28-17, 09:17 PM
Post: #1
|
|||
|
|||
Using Axiom to update EV-100 Wheel pilot ?
Hi Forum. Need to update this wheel pilot to allow it to "track" to Garmin MFD. Called Raymarine technical support and was told that it could. So I downloaded ray_Pilots_20170519.upgrade.iso copied it to SD card and tried lots of different things. Although I could see EV1 on network I found no way to initiate upgrade of particular devices on network. Can somebody at Raymarine actually confirm this is possible as there is nothing in the directions about supporting Axiom units.
Thank you |
|||
07-31-17, 01:16 PM
Post: #2
|
|||
|
|||
RE: Using Axiom to update EV-100 Wheel pilot ?
Chris,
While it is possible for Axiom MFDs to update its own software, LightHouse 3 v3.1.96 software does support updating/downgrading software within other networked products. As this feature is very high on the list of LH3 feature additions, it is quite possible that the next quarterly update will add this feature. in the interim, such software updates may be performed by many Raymarine dealers, Certified Raymarine Installer, or by Raymarine’s Product Repair Center. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)