Raymarine forum / Raymarine Forums / Multifunction Displays v / Diagnosing NOFIX on L760

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Diagnosing NOFIX on L760
08-13-17, 09:43 AM
Post: #1
jmoudy Offline
Junior Member
**
 		Posts: 2
Joined: Jul 2017
Reputation: 0
Diagnosing NOFIX on L760
I have an L760/RL70C connected by seatalk1 to GPS (RN300). Has worked for years. Now having trouble with a NOFIX displayed on the L760 and RL70C displays -- but the RN300 has a fix displayed. Note, this is an intermittent problem. I see on the internet there is a diagnostic hidden menu to show the seatalk hex codes. Can I get some assistance to see this... it would help me diagnosing the problem.

Thank you.
Find all posts by this user
Quote this message in a reply
08-16-17, 02:46 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Diagnosing NOFIX on L760
Welcome to the Raymarine Forum Jmoudy,

Unfortunately, the RN300/RC300 is no longer supported. Both the RN300/RC300 and L760 feature NMEA 0183 communications interfaces. If the RN300 is presently interfaced to the L760 via SeaTalk and you have verified that the SeaTalk connections between these products free of corrosion and the plugs have been tightly connected to the displays, and should the problem persist, then you may want to consider disconnect the RN300 from the SeaTalk bus and instead interface the RN300 to the L760 via NMEA 0183.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication