Raymarine forum / Raymarine Forums / Autopilots v / Seatalk1 Autopilot not communicating with E120 via SeatalkNG convertor

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seatalk1 Autopilot not communicating with E120 via SeatalkNG convertor
08-17-17, 08:48 PM
Post: #1
dhong24 Offline
Junior Member
**
 		Posts: 5
Joined: Apr 2017
Reputation: 0
Seatalk1 Autopilot not communicating with E120 via SeatalkNG convertor
I can't get my seatalk devices to communicate with the E120. I am using the E22158 Seatalk1 to SeatalkNG cables connected to my ST6001+ via seatalk thats connected to my Raytheon Autopilot 100-300. Are these just not compatible?
Find all posts by this user
Quote this message in a reply
08-21-17, 10:28 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Seatalk1 Autopilot not communicating with E120 via SeatalkNG convertor
Welcome to the Raymarine Forum dhong24

Your autopilot is not supported when interfaced to the system via the SeaTalk to SeaTalkng Converter. Please click here to view a FAQ addressing this subject. Should you attach a system diagram to this thread identifying each of the marine electronic devices and how you intend to interface these devices to one another, then we may be able to provide further assistance.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication