Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A60 Dual Function Display - Depth Alarm?
08-22-17, 11:53 AM
Post: #1
A60 Dual Function Display - Depth Alarm?
Is there any way to set an alarm that will go off if you accidentally travel into shallow waters? I searched the owners handbook several times, but came up with nothing. Did I miss it or is this just not an option with this older model?
Find all posts by this user
Quote this message in a reply
08-22-17, 03:08 PM
Post: #2
RE: A60 Dual Function Display - Depth Alarm?
Welcome to the Raymarine Forum JulD,

Is the A60 interfaced to an operational DSM25 Digital Sounder Module? If so, then any related depth alarms would be found within the display's Fishfinder settings.
Find all posts by this user
Quote this message in a reply
08-22-17, 03:33 PM (This post was last modified: 08-22-17 03:42 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: A60 Dual Function Display - Depth Alarm?
I'm sorry. I just got this boat and the A60 came with it. How would I check to see if it is interfaces with a DSM25 Digital Sounder Module?
Find all posts by this user
Quote this message in a reply
08-22-17, 03:44 PM
Post: #4
RE: A60 Dual Function Display - Depth Alarm?
JulD,

The easiest means by which one may determine whether an A60 or A65 Display has been interfaced to an operational DSM25 would be to open a Fishfinder application page within the display and then watch it to determine whether it was populating with fishfinder imagery.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)