Raymarine forum / Raymarine Forums / Fishfinders v / Axiom 7 3D recommendation for power supply(kayak application)

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom 7 3D recommendation for power supply(kayak application)
09-05-17, 04:41 PM
Post: #1
Jim Ware Offline
Junior Member
**
 		Posts: 1
Joined: May 2016
Reputation: 0
Axiom 7 3D recommendation for power supply(kayak application)
Hello, I'm looking at the Axiom 7 3D to put on my kayak. I'm lost when it comes to voltage/amp hours etc. My last depth finder got 2 good days on my 12v18ah sla battery but I can't find info on the axiom 7 3D's amp usage. Thanks for any info in advance! Jim
Find all posts by this user
Quote this message in a reply
09-06-17, 10:41 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Axiom 7 3D recommendation for power supply(kayak application)
Welcome to the Raymarine Forum Jim,

Per the Technical Specifications tab of the Axiom 7 MFD web page, the power consumption of the Axiom 7 RV MFD is 9.84 Watts. Using the equation P=IV, the current consumption within a 12V system would be 12 / 9.84 = 1.22A.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication