European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
Seatalk 1 to Existing NMEA 2000 Network
|
|
04-07-16, 07:43 AM
Post: #1
|
|||
|
|||
|
Seatalk 1 to Existing NMEA 2000 Network
I would like to interface an ST60+ Depth to an existing NMEA 2000 Network. I believe the ST1 to STNG converter should be connected as an extension of the NMEA 2000 backbone with power being supplied by the existing NMEA 2000 network. If I terminate the converter on one end and the NMEA 2000 backbone on the other end, how do I connect the converter backbone to the NMEA 2000 backbone using the blue connector on the converter? Is there a blue connector devicenet adapter cable available similar to the A06045 and A06046?
Thanks! |
|||
|
|
04-07-16, 09:27 AM
Post: #2
|
|||
|
|||
|
RE: Seatalk 1 to Existing NMEA 2000 Network
Welcome to the Raymarine Forum baja [censored],
At the time of this response, Raymarine did not offer a SeaTalkng to DeviceNet Micro-C Backbone (M or F) Adapter Cable. Please click here to view a FAQ addressing this subject. |
|||
|
|
|
04-07-16, 11:22 AM
Post: #3
|
|||
|
|||
|
RE: Seatalk 1 to Existing NMEA 2000 Network
OK, got it. Thanks!
|
|||
|
|
|
04-08-16, 03:00 PM
Post: #4
|
|||
|
|||
|
RE: Seatalk 1 to Existing NMEA 2000 Network
Anytime, contact us with any future questions.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 4 Guest(s)