Raymarine forum / Raymarine Forums / Multifunction Displays v / Axiom Compatibility with "a Series"

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom Compatibility with "a Series"
10-04-17, 10:54 AM
Post: #1
bdunnick1 Offline
Junior Member
**
 		Posts: 1
Joined: Oct 2017
Reputation: 0
Axiom Compatibility with "a Series"
New to the Raymarine world. I currently have two a98 MFDs that are new in the box. I am wondering whether or not those are able to be networked with the axiom series so that I can see sonar, SideScan, DownScan, and 3D on my outlying a98s. Essentially I am hoping to put an Axiom 12 on the console and network it to a a98 on the bow and another on the stern. Can you please let me know if this is possible?

TY.
Brett
Find all posts by this user
Quote this message in a reply
10-04-17, 11:01 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Axiom Compatibility with "a Series"
Welcome to the Raymarine Forum Brett,

At this time it is not possible to specify with certainty an a-Series MFD will be compatible with the Axiom MFDs, or more specifically, with LightHouse 3 software. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication