Raymarine forum / Raymarine Forums / Autopilots v / EV-1 location

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV-1 location
10-30-17, 09:16 AM (This post was last modified: 10-30-17 09:34 AM by Chuck - Raymarine - Moderator.)
Post: #11
jegnew Offline
Junior Member
**
 		Posts: 4
Joined: Sep 2017
Reputation: 0
RE: EV-1 location
I have, it's just having to drill more holes in a steel boat.
Find all posts by this user
Quote this message in a reply
10-30-17, 09:39 AM
Post: #12
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: EV-1 location
jegnew,

When uncertain about the suitability of a proposed mounting location, it is recommended that the device be installed in a temporary manner which would then permit testing of the product's performance in that location without committing to drilling holes and chasing cables. Industrial Velcro, zip ties, etc. can be valuable products for such temporary installations. You may also want to consider running cables outside of chases until the proposed installation location has been verified to be suitable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication