Raymarine forum / Raymarine Forums / Autopilots v / [CA] Ball Joint Kit for Rudder Reference Sensor

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Ball Joint Kit for Rudder Reference Sensor
12-14-17, 05:02 PM (This post was last modified: 12-15-17 08:34 AM by Chuck - Raymarine - Moderator.)
Post: #1
Alex W Offline
Junior Member
**
 		Posts: 1
Joined: Dec 2017
Reputation: 0
[CA] Ball Joint Kit for Rudder Reference Sensor
What is the current part number for the Ball Joint Kit and rod? The kit used to be part number D143, but when my Raymarine dealer searched they couldn't find that in the price list. I don't see this listed anywhere on Raymarine.com.
Find all posts by this user
Quote this message in a reply
12-15-17, 08:27 AM (This post was last modified: 12-15-17 08:34 AM by Chuck - Raymarine - Moderator.)
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [CA] Ball Joint Kit for Rudder Reference Sensor
Welcome to the Raymarine Forum Alex,

D143 is the part number for the rudder reference transducer's all joint alone (included the ball to be mounted a fixed structure and two sockets). The part number for the rudder reference transducer's threaded rod is 3014-008-A. These parts are indeed currently available.

Please click here to view a FAQ addressing how one may purchase parts for Raymarine products.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication