European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
RF drain wire on power cords
|
|
04-13-16, 03:53 PM
Post: #11
|
|||
|
|||
|
RE: RF drain wire on power cords
OK, thank you for that information. I haven't been able to locate the bonding cable as of yet on my boat, but I presume it has one. One thing I did notice is there appears to be a grounding wire tied to the bolts for the fuel fill where it comes through the hull, which is next to the access panel for electronics / back side of the dash. Would it be possible to tie my RF drains in to that wire and achieve the required bonding / grounding, or is that not recommended?
|
|||
|
|
04-13-16, 03:58 PM
(This post was last modified: 04-13-16 04:00 PM by Chuck - Raymarine - Moderator.)
Post: #12
|
|||
|
|||
|
RE: RF drain wire on power cords
It is not recommended that you do as you have suggested. Should your boat have a bonding cable, then it would likely be connected to a bonding plate. You may want to consider searching from the direction of the bonding plate.
|
|||
|
|
|
04-13-16, 04:10 PM
Post: #13
|
|||
|
|||
|
RE: RF drain wire on power cords
OK, I will keep looking for the bonding plate. Thanks for your help Chuck.
|
|||
|
|
|
04-14-16, 08:22 AM
Post: #14
|
|||
|
|||
|
RE: RF drain wire on power cords
You're welcome.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 3 Guest(s)