Raymarine forum / Raymarine Forums / Fishfinders v / [CA] Raymarine Axiom RealVision 3D increasing depth range

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Raymarine Axiom RealVision 3D increasing depth range
01-10-18, 06:46 AM (This post was last modified: 01-10-18 12:59 PM by Chuck - Raymarine - Moderator.)
Post: #1
BarraMania Offline
Junior Member
**
 		Posts: 1
Joined: Jan 2018
Reputation: 0
Question [CA] Raymarine Axiom RealVision 3D increasing depth range
Hi there,

How do I upgrade the depth range of the RealVision 3D on a Axiom unit as I have been told it is only good to approximately 90 metres.

Cheers,
Matt
Find all posts by this user
Quote this message in a reply
01-10-18, 03:15 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Raymarine Axiom RealVision 3D increasing depth range
Welcome to the Raymarine Forum Matt,

Please click here to view a FAQ addressing maximum depths for DownVision, SideVision, RealVision 3Dâ„¢ sonar, and High CHIRP (conical) sonar. If fishing in depths greater than are supported by RealVision 3Dâ„¢ sonar, then it would be recommended that the DownVision or High CHIRP (conical) Sonar channel be selected for depths up to those supported by these sonar channels. If fishing in depths greater than are supported by the DownVision or High CHIRP (conical) Sonar channel, then please specify the maximum depth which will be fished.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication