Raymarine forum / Raymarine Forums / Autopilots v / Using a Rotary Rudder Reference with an outboard engine.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Using a Rotary Rudder Reference with an outboard engine.
12-16-15, 03:07 PM (This post was last modified: 09-27-16 10:32 AM by Chuck - Raymarine - Moderator.)
Post: #1
Steve - Raymarine - Moderator
Unregistered
 		 
Using a Rotary Rudder Reference with an outboard engine.
Yes, but a bracket will need to be fabricated because of the tilt of the outboard motor. I have enclosed a picture below showing that type of installation. I would recommend the SeaStar Smartstick (Raymarine version), we work with their linear rudder reference.... There is a specific Raymarine part number at the bottom of the link.

"[Image: attachment.php?aid=4]

SJC FAQ#


Attached File(s) Thumbnail(s)
   
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication