Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] New Axiom 7

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] New Axiom 7
02-07-18, 02:10 PM (This post was last modified: 02-08-18 02:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
ChuckM Offline
Junior Member
**
 		Posts: 5
Joined: Feb 2018
Reputation: 0
[CA] New Axiom 7
I have a new Axiom 7 that will be interfaced with older ST60 instruments and a new EV-100. Two questions:
1) Does the Navionics card stay in the MFD, or is it just downloaded after initial power up? 2) Can I transfer waypoints and routes from my existing Garmin 540 with an SD card?
Find all posts by this user
Quote this message in a reply
02-08-18, 12:36 PM (This post was last modified: 02-08-18 02:24 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] New Axiom 7
Welcome to the Raymarine Forum Chuck,

Q1) Does the Navionics card stay in the MFD, or is it just downloaded after initial power up?
A1) The chart card must be present within the MFD's memory card reader when operating the system. Please click here to view a related FAQ addressing this subject which also applies to Axiom MFDs.

Q2) Can I transfer waypoints and routes from my existing Garmin 540 with an SD card?
A2) Quite possibly. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication