Raymarine forum / Raymarine Forums / Instruments v / [CA] ITC-5 Setup & Calibration

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] ITC-5 Setup & Calibration
02-04-18, 05:13 PM (This post was last modified: 02-08-18 05:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
Wooly Offline
Junior Member
**
 		Posts: 7
Joined: Dec 2017
Reputation: 0
[CA] ITC-5 Setup & Calibration
System comprising eS75 MFD, STNG bus, STNG convertor, ST60+ tridata and some other devices.

Speed/temperature & depth transducers connected to ST60+

Could the transducers be connected to an ITC-5 and this then calibrated (depth offset, speed, temperature) with the eS75, the ST60+ tridata then functioning as a repeater, or is an instrument needed for ITC-5 calibration?

The tridata memorises total logged distance. Is it possible to calibrate an ITC-5 to match? Indeed is total distance logged stored in the ITC-5?

Thanks
W
Find all posts by this user
Quote this message in a reply
02-08-18, 05:15 PM (This post was last modified: 02-09-18 09:39 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] ITC-5 Setup & Calibration
Welcome to the Raymarine Forum Wooly,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication