[DG] Axiom 9 cannot fix to satellites after Factory Reset
|
02-23-18, 03:24 PM
(This post was last modified: 02-26-18 06:00 AM by Derek - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[DG] Axiom 9 cannot fix to satellites after Factory Reset
Hi Chuck
Problems continues after Factory Reset today - have already sent two threads. My Axiom 9 now takes about 30 minutes to fix to satellites even that it shows 30 GPS in the little orange dot and 10 Glonoss - see picture 1 and 2 So what I can conclude now after Factory Reset is: 1. Difficulties to Satellite Fix 2. No Autoroute dropdown menues see picture 3 and 4 - In demomode Autoroute dropdown menu works 3. No Shallow Water setting possible se picture 5 I have tried to solve these issues today by: 1) Once more Factory Reset 2) Upgrading my Navionics+ card see picture 6 3) Reloaded the LH 3.3.170 Software picture 7-8 I really regret making the Factory Reset - before that I "just" had some power on swip problems! Axiom is bought 15.2.2018 Rg Jorgen |
|||
02-26-18, 06:07 AM
Post: #2
|
|||
|
|||
RE: [DG] Axiom 9 cannot fix to satellites after Factory Reset
Hi Jorgen,
If you have no GPS Fix, then AUTO ROUTING will not operate, I see in a later post that you completely depowered the display, then when repowered the unit completed its restart and it all seems to operate correctly. This has not been previously reported as a failure mode or bug so please can you monitor this and report back if it reoccurs. regards |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)