Raymarine forum / Raymarine Forums / Multifunction Displays v / Add ST60+ to E80

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Add ST60+ to E80
04-13-18, 12:51 PM
Post: #1
Harlen Offline
Junior Member
**
 		Posts: 6
Joined: Apr 2018
Reputation: 0
Add ST60+ to E80
I have an older E80 display with SeaTalk and am looking at adding the ST60+ Wind instrument to it.

Will the ST60+ show true wind on its display?

Will true wind appear in the chartplotter?

Is there a newer wind instrument that would also work with the E80?

Thanks.
Find all posts by this user
Quote this message in a reply
04-13-18, 01:44 PM (This post was last modified: 04-13-18 01:47 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Add ST60+ to E80
Welcome to the Raymarine Forum Harlen,

When properly interfaced via a powered SeaTalk bus to the MFD, the ST60 Wind instrument will support displaying True Wind if the system features sensors supporting the data items specified within the FAQ found here.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication