Raymarine forum / Raymarine Forums / Autopilots v / [CA11] S100 Heading display

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] S100 Heading display
05-15-18, 09:53 PM (This post was last modified: 05-17-18 08:43 AM by Chuck - Raymarine - Moderator.)
Post: #1
stephen_i_w Offline
Junior Member
**
 		Posts: 7
Joined: Sep 2016
Reputation: 0
[CA11] S100 Heading display
Why does the S100 display a different heading than the P70 autopilot head?
Find all posts by this user
Quote this message in a reply
05-17-18, 08:46 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] S100 Heading display
Welcome to the Raymarine Forum Stephen,

We have received no similar reports of this issue and have a concern that the symptom reported may be resulting from an installation issue and/or second source of heading data within the system. Please attach a system diagram (hand drawn will generally suffice) identifying the makes and models of each of the marine electronics devices within the system (including computers / tablets running navigational planning / chartplotting applications) may be be requested to support an investigation. The diagram should additionally identify how these devices have been interfaced to one another.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication