Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA11] wide path recored on chart

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] wide path recored on chart
05-29-18, 07:39 PM (This post was last modified: 05-30-18 08:54 AM by Chuck - Raymarine - Moderator.)
Post: #1
Harpo Offline
Junior Member
**
 		Posts: 1
Joined: May 2018
Reputation: 0
[CA11] wide path recored on chart
I just installed an es128 chart/fishfinder running Lighthouse 3 software with Navionics chart.

It is showing a wide path behind the boat on the chart (see attachment). I have tracking off and tried track delete without success.

I included a screen shot of the problem. How do I correct it?

Thank you, Mark
Find all posts by this user
Quote this message in a reply
05-30-18, 09:39 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] wide path recored on chart
Welcome to the Raymarine Forum Mark,

Please click here to view a FAQ addressing this subject. Should you not desire to view this feature, then the one may configure the SonarChart Live feature to OFF.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication