Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom selects BOTH navionics chart types

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom selects BOTH navionics chart types
06-22-18, 08:25 PM (This post was last modified: 06-27-18 03:23 PM by Chuck - Raymarine - Moderator.)
Post: #1
dircm Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2018
Reputation: 0
[CA11] Axiom selects BOTH navionics chart types
my Axiom 12 cannot display the Navionics SonarChart on screen. When I tried to select it the axiom always ticks both sonar and nautical map types.

I have tried selecting the cmap or lighthouse chart types and back to sonar but every time both charts are ticked.

I have not tried doing anything with the SD card yet.

Image below or visit https://ibb.co/kNgkUo

[Image: Axiom_both_charts.jpg]


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
06-27-18, 03:25 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom selects BOTH navionics chart types
Welcome to the Raymarine dircm,

Please click here to view another thread in which I had previously addressed this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication