Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Rudder Transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Rudder Transducer
07-21-18, 02:49 PM (This post was last modified: 07-23-18 03:59 PM by Chuck - Raymarine - Moderator.)
Post: #1
jamoritz Offline
Junior Member
**
 		Posts: 4
Joined: Nov 2017
Reputation: 0
[CA11] Rudder Transducer
Have SPX-5 with P70 display.
I have a 7 degree rudder position offset on P70 display.
How do I change rudder offset with P70
Find all posts by this user
Quote this message in a reply
07-23-18, 03:49 PM (This post was last modified: 07-23-18 03:59 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Rudder Transducer
Welcome to the Raymarine Forum jamoritz,

Rudder offset is accessed/configured via the command sequence MENU->SET-UP->AUTOPILOT CALIBRATION->DRIVE SETTINGS->RUDDER OFFSET.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication