Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Displaying differing zoom on second display

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Displaying differing zoom on second display
07-27-18, 11:59 AM (This post was last modified: 07-30-18 03:01 PM by Chuck - Raymarine - Moderator.)
Post: #1
sb in gp Offline
Junior Member
**
 		Posts: 5
Joined: Feb 2016
Reputation: 0
[CA11] Displaying differing zoom on second display
This seems simple, but I've not been able to find it.

I have two e120 displays, 1 as master. Both are displaying an active chart. I'd like to zoom in on one display and further out on the other. Right now they both keep the same zoom whenever I change 1 display.

Thanks

Scott
Find all posts by this user
Quote this message in a reply
07-30-18, 03:19 PM (This post was last modified: 07-30-18 03:27 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Displaying differing zoom on second display
Welcome to the Raymarine Forum Scott,

Please verify that you have configured the Chart application's Chart Sync feature (MENU->PRESENTATION->VIEW & MOTION->CHART SYNC) to OFF within any Chart application pane in which you do not desire synchronization with another Chart application pane.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication