Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] P74 Transducer Set Up
08-01-18, 10:31 AM (This post was last modified: 08-01-18 10:56 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] P74 Transducer Set Up
I have installed a new P74 transducer as an in hull mount on connecting directly to the internal sounder of my e127. The last time I updated lighthouse was in Early 2016 but I can’t find P74 in the transducer selection on the MFD. If I update the firmware will that selection become available or is their a compatible transducer selection that I should be making? - I see P79 but that is a different transducer style.

Many thanks.
Find all posts by this user
Quote this message in a reply
08-01-18, 12:06 PM
Post: #2
RE: [CA11] P74 Transducer Set Up
Welcome to the Raymarine Forum bytebass,

As you have indicated, the P74 transducer is not among the transducers listed with the transducer selection features of the Fishfinder application's Transducer Settings. However, the elements of the P74 transducer very similar to those of the P79 transducer. Accordingly, it is recommended that the P79 transducer be selected from the the Fishfinder application's Transducer Settings.
Find all posts by this user
Quote this message in a reply
08-01-18, 01:05 PM (This post was last modified: 08-02-18 08:03 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] P74 Transducer Set Up
Many thanks Chuck. Will do.
Find all posts by this user
Quote this message in a reply
08-02-18, 08:03 AM
Post: #4
RE: [CA11] P74 Transducer Set Up
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)