Is it possible to get final ETA at a with auto routing
|
08-09-18, 10:52 AM
Post: #1
|
|||
|
|||
Is it possible to get final ETA at a with auto routing
How can you get a a final ETA on the route when you use auto routing?
Axiom 9" software 3.6.32 |
|||
08-15-18, 11:27 AM
Post: #2
|
|||
|
|||
RE: [CA11] Is it possible to get final ETA at a with auto routing
Welcome to the Raymarine Forum Dan,
In order for the MFD to report the ETA at the last waypoint of the route, one must command the system to follow the route (Follow Route) and the vessel must be moving in a direction towards one of the waypoints. The command sequence MENU->ROUTES, WAYPOINTS, & TRACKS->ROUTES->select route from route list->VIEW ROUTE PLAN. Alternatively, the Dashboard application may be displayed within a pane or page and one of the panel's data cells may be configured to display the Route ETA data item (found within the Navigation data group). A feature request has been logged to add this data item, as well as all data items supported by the Dashboard application, to be displayed as a Data Overlay data item and as a data item within the Sidebar. |
|||
08-15-18, 07:55 PM
(This post was last modified: 08-16-18 08:01 AM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: Is it possible to get final ETA at a with auto routing
While you are considering additions to the data sidebars you might consider using bolder type face. It will these 83 year old eyes to read it better. I think you can do that in the existing space.
|
|||
08-16-18, 08:02 AM
Post: #4
|
|||
|
|||
RE: Is it possible to get final ETA at a with auto routing
Noted.
|
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)