Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG] Autohelm Type 100 updates?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] Autohelm Type 100 updates?
09-05-18, 02:05 PM (This post was last modified: 09-10-18 08:22 AM by Derek - Raymarine - Moderator.)
Post: #1
Ray Kowerchuk Offline
Junior Member
**
 		Posts: 4
Joined: Nov 2016
Reputation: 0
[DG] Autohelm Type 100 updates?
I have a type 100 on a 2 station hydraulic steering system, Raymarine ST-6000+ Control head. I replaced the NMEA bridge with a Brookhouse IMUXst wifi and hooked up my Ipad,my problem is everything works on Ipad(INAVX), displays going to WP#1 but the ST-6000+ shows “NO DATA” when tracking button pushed. I read somewhere that I need to update the firmware??? I don’t think that is possible anymore on this equipment. What would be a good replacement without adding to much expense? Thanks
Find all posts by this user
Quote this message in a reply
09-10-18, 08:23 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG] Autohelm Type 100 updates?
Hi Ray,
I covered this in the other post, but let me know if you have other questions
Regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication