Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] LH 3 waypoint XLM schema
09-17-18, 04:39 PM (This post was last modified: 09-18-18 09:19 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] LH 3 waypoint XLM schema
Hi -

I've migrated to Raymarine from other brands and I'm having difficulty migrating waypoints from third-party devices work within the Raymarine WP constraints:

http://forum.raymarine.com/showthread.php?tid=26

I've tried Voyage Planner, but I can't figure out how to remove the forbidden tags and it would much easier for me to simply use a text editor to remove them. Can you post an example of the permitted XML schema? I can infer it from a new WP, published GPX specs and the FAQ guidelines, but it would be nice to see Raymarine's reference XML.

Thanks!
Find all posts by this user
Quote this message in a reply
09-18-18, 09:18 AM
Post: #2
RE: [CA11] LH 3 waypoint XLM schema
Welcome to the Raymarine Forum Mike,

Please be aware that there are faults within the LightHouse 3 v3.6.32 software affecting importing routes from a GPX file and exporting waypoints to a GPX file. It is expected that these faults should be corrected within LightHouse 3 v3.7.x which is expected to be released shortly.

I am not aware of any issues with tags which are forbidden within LightHouse 3 software and if operating the MFD with LightHouse 3 v3.6.32, you may be encountering an issue related to that which has been specified above. Should you have addressed the constraints which have been specified within the previously referenced FAQ, then it is recommended that you attach your GPX file to this thread for further analysis.

As you have suggested GPX files may be viewed and edited by simply using a text editing tool. A sample GPX file containing waypoints may easily be created by simply creating a few waypoints via the MFD's user interface and then exporting the waypoints to a GPX file. Similarly, A sample GPX file containing route data may easily be created by simply creating a 3-4 point route via the MFD's user interface and then exporting the route to a GPX file. A sample GPX file has been attached to this response containing waypoints and a route.


Attached File(s)
.gpx  Archive_09_18_2018.gpx (Size: 3.81 KB / Downloads: 318)
Find all posts by this user
Quote this message in a reply
09-18-18, 09:49 AM
Post: #3
RE: [CA11] LH 3 waypoint XLM schema
Hi Chuck -

Thanks for the detailed response. I'll take a crack at this and report back.

Thanks,

Mike
Find all posts by this user
Quote this message in a reply
09-18-18, 10:26 AM
Post: #4
RE: [CA11] LH 3 waypoint XLM schema
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)