European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[CA] [CA11] RADAR overlay on C Series
|
|
10-20-18, 02:54 PM
(This post was last modified: 10-22-18 03:07 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[CA11] RADAR overlay on C Series
I have a C120 with the latest software update, v5.16. Will I be able to use the RADAR overlay again if I install v4.30?
|
|||
|
|
10-22-18, 03:13 PM
Post: #2
|
|||
|
|||
|
RE: [CA11] RADAR overlay on C Series
Welcome to the Raymarine Forum Max Bottomtime,
As you have suggested the C-Series Classic MFD v5.16 software requires that the MFD be interfaced to a source of heading data when seeking to use the software's radar overlay feature. Should the software of the C-Series Classic MFD be downgraded to v4.30, then the MFD will support radar overlay with the support of either heading or COG. The link to the v4.30 C-Series Classic MFD software update may be found within the software history table of the C-Series Classic MFD software update web page. When using the currently available Navionics cartography, it is recommended that the MFD be operating with v5.16 C-Series Classic MFD software. |
|||
|
|
|
10-27-18, 12:59 PM
(This post was last modified: 10-29-18 08:01 AM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
|
RE: [CA11] RADAR overlay on C Series
I uploaded V.4.30 this morning and everything is working perfectly. I have the radar overlay back. :)
|
|||
|
|
|
10-29-18, 08:01 AM
Post: #4
|
|||
|
|||
|
RE: [CA11] RADAR overlay on C Series
You're welcome.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)