Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] dragonfly pro 5
10-30-18, 02:18 PM (This post was last modified: 10-30-18 02:52 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] dragonfly pro 5
to begin with thanks for the add ,, so i just bought a dragonfly pro 5 ,,installed it went to the lake ,, from the start it had strange lines slanting across the screen ,, no arches ,, just lines ,,lots of lines ,,tried restart,,tried settings nothing helps ,, ill try sending pics ,, any ideas ?? needin a little help,,,,
Find all posts by this user
Quote this message in a reply
10-30-18, 02:54 PM
Post: #2
RE: [CA11] dragonfly pro 5
Welcome to the Raymarine Forum PAWDAD,

Some photos would indeed be helpful in identifying the symptoms and then providing a recommended course of action to correct the problem.
Find all posts by this user
Quote this message in a reply
04-11-19, 11:30 AM (This post was last modified: 04-11-19 12:30 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] dragonfly pro 5
I know that this is an old post, but wanted to mention that I frequently see diagonal lines when travelling in my kayak. They are due to gas bubbles released off bottom and rising in the water column. They will always be aligned in a NE-SW axis as you move along. If your diagonal lines are going in a different direction, then they are not due to gas bubbles.
Find all posts by this user
Quote this message in a reply
04-11-19, 12:31 PM
Post: #4
RE: [CA11] dragonfly pro 5
Noted.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)