Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] I70 Fuel Sensor

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] I70 Fuel Sensor
02-11-19, 06:00 PM (This post was last modified: 02-12-19 10:14 AM by Chuck - Raymarine - Moderator.)
Post: #1
jvielehr Offline
Junior Member
**
 		Posts: 1
Joined: Jan 2019
Reputation: 0
[CA11] I70 Fuel Sensor
I just purchased the I70 Display. I have a Moeller Marine Electrical Reed Switch Fuel Sending Unit on my tank. What NMEA sensor would you recommend to connect the i70 to the sending unit?
Find all posts by this user
Quote this message in a reply
02-12-19, 10:19 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] I70 Fuel Sensor
Welcome to the Raymarine Forum jvielehr,

Raymarine does not recommend any specific brand of NMEA 2000 tank level sensor. When seeking third party NMEA 2000 sensors, it is recommended that one seek sensors which carry NMEA 2000 certification. NMEA maintains a list devices having NMEA 2000 certification on its website. Should the third party NMEA 2000 sensor require calibration and/or configuration, it must be done in accordance with the sensor manufacturer's instructions and may require an additional third party device and/or computer software.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication