Raymarine forum / Raymarine Forums / Product Selection Assistance v / [DG] [DG11] connection ES series and volvo penta easy connect

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] connection ES series and volvo penta easy connect
03-13-19, 08:17 AM (This post was last modified: 03-13-19 01:12 PM by Chuck - Raymarine - Moderator.)
Post: #1
thilau Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2019
Reputation: 0
[DG11] connection ES series and volvo penta easy connect
hi
as I see both systems are possibly connected by NMEA2000 I would like to know if it is possible to see motor data on Raymarine ES with lighthouse 2, does anybody alredy did this connection?
Find all posts by this user
Quote this message in a reply
03-14-19, 06:03 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] connection ES series and volvo penta easy connect
Hi thilau,

Thank you for your enquiry.

The Volvo Penta Easyconnect can be connected through NMEA2000/ STng to the eS series display, it will display engine information, but we are also aware that there is a software update due from Volvo due to some irregularitiy with rudder angle display.

regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication