Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] Axiom not displaying heading after update

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom not displaying heading after update
03-24-19, 11:59 AM (This post was last modified: 03-25-19 02:40 PM by Chuck - Raymarine - Moderator.)
Post: #1
b4a Offline
Junior Member
**
 		Posts: 7
Joined: Mar 2019
Reputation: 0
[CA11] Axiom not displaying heading after update
I installed the latest update for my Axiom Pro, and now every once in a while the chartplotter doesn't display the Heading vector, even when selected in the options. It shows the COG but not the heading.

My system info are in the screenshots attached.
Find all posts by this user
Quote this message in a reply
03-25-19, 02:46 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom not displaying heading vector after update
Welcome to the Raymarine Forum b4a,

If observing the reported issue and the vessel is stationary or moving a relatively slow speed, please configure the vector lengths to a longer setting (ex. 30 minutes, 60 minutes) or to Infinite.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication