Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Hs5 power output?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Hs5 power output?
04-29-19, 06:29 PM (This post was last modified: 04-30-19 12:09 PM by Chuck - Raymarine - Moderator.)
Post: #1
Farmhand Offline
Junior Member
**
 		Posts: 23
Joined: May 2016
Reputation: 0
[CA11] Hs5 power output?
Sorry if this has been addressed. Wondering how much power a hs5 can put out through a poe injector. I’m trying to power a camera that operates 12v at 5 watts. Thank you

Wade
Find all posts by this user
Quote this message in a reply
04-30-19, 12:27 PM (This post was last modified: 04-30-19 03:17 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Hs5 power output?
Welcome to the Raymarine Forum Wade,

The HS5 RayNet Network Switch is not a POE switch. FLIR offers the 4113746 single port POE injector (15.4W) and the 4141042 4 port POE switch (30W/port).
Find all posts by this user
Quote this message in a reply
04-30-19, 02:27 PM (This post was last modified: 04-30-19 03:15 PM by Chuck - Raymarine - Moderator.)
Post: #3
Farmhand Offline
Junior Member
**
 		Posts: 23
Joined: May 2016
Reputation: 0
RE: [CA11] Hs5 power output?
Ah. Thank you
Find all posts by this user
Quote this message in a reply
04-30-19, 03:15 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Hs5 power output?
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication