Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] 2 RMK-10 connected to one sigle Axiom

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] 2 RMK-10 connected to one sigle Axiom
05-09-19, 02:20 AM (This post was last modified: 05-09-19 04:06 PM by Chuck - Raymarine - Moderator.)
Post: #1
RaymarineFan Offline
Junior Member
**
 		Posts: 6
Joined: Dec 2017
Reputation: 0
[CA11] 2 RMK-10 connected to one sigle Axiom
Is it possible to connect 2 RMK-10 to one sigle Axiom?
It could be very handy having a sailboat with 2 wheels and one Axiom whose touch screen is not easily touchable.
Thank you for your kind attention.
Find all posts by this user
Quote this message in a reply
05-09-19, 04:09 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] 2 RMK-10 connected to one sigle Axiom
Welcome to the Raymarine Forum RaymarineFan,

Indeed it is possible to use more than one RMK-9/10 with a single Axiom MFD. However, as the Axiom MFDs feature only one Ethernet Network socket, the system will need to include a HS5 RayNet Network Switch. The MFD and RMKs will then be interfaced to the HS5 RayNet Network Switch via an appropriate lengths of RayNet (F) to RayNet (F) Cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication