Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] a seris tranducer to dsm 300

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] a seris tranducer to dsm 300
06-10-19, 01:42 PM (This post was last modified: 06-11-19 04:01 PM by Chuck - Raymarine - Moderator.)
Post: #1
Tommyd Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2019
Reputation: 0
[CA11] a seris tranducer to dsm 300
Subject is self explaining. I am going from a a70 machine to a 140w and my transducer, airmar, has no issues. the cable hover does not match up. I believe i am going to use a cable to my 300, e66009, then splice to my existing transducer cable. there was a junction box they used for this in the past but i don't believe i need it. Any thoughts or recommendations?
thanks
Find all posts by this user
Quote this message in a reply
06-11-19, 04:03 PM (This post was last modified: 06-11-19 04:04 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] a seris tranducer to dsm 300
Welcome to the Raymarine Forum Tommy,

Please click here to view a FAQ addressing splicing transducer cables. At one time Airmar had offered an A-Series Transducer Adapter to permit these transducers to be mated to a DSM30/300. It is recommended that Gemeco, Inc. (Airmar’s US distributor (803 693 0777)) be contacted to determine whether this adapter cable is still available.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication