Raymarine forum / Raymarine Forums / Multifunction Displays v / [LW] [LW11] ES128 /nmea0183

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] ES128 /nmea0183
06-18-19, 01:29 PM (This post was last modified: 06-20-19 02:47 AM by Louise - Raymarine - Moderator.)
Post: #1
Nandi Offline
Junior Member
**
 		Posts: 10
Joined: Oct 2018
Reputation: 0
[LW11] ES128 /nmea0183
Hi, I’ve integrated my es128 with older B&g network instruments and pilot. Data loops accounted for I believe. Everything works as expected except when pilot is following route info from the mfd, it loses nmea input briefly and the pilot trips out. This happens every 15-20mins. Putting pilot on standby then back to auto immediately fixes things. Have checked wiring. This never happened when pilot interfaced to older gps. Any ideas appreciated.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication