Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 RV screen shot
06-21-19, 08:35 AM (This post was last modified: 06-21-19 12:44 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom 9 RV screen shot
If I take a screen shot with my Axiom and it is stored in the screenshot file how do I move it to a removable card? I tried to take a screen shot and it wasn't in the file though I had an Nav. SD card in the unit at the time, did it maybe save onto the card and not go to the screenshot file. I pulled the Nav. card out and put in a blank SD to get the screenshot but it wasn't there. I haven't checked the Nav. card which is on the boat at the lake right now.
Find all posts by this user
Quote this message in a reply
06-21-19, 12:47 PM
Post: #2
RE: [CA11] Axiom 9 RV screen shot
Welcome to the Raymarine Forum 1851DC,

When a screen capture is commanded from an Axiom MFD, the resulting png file will be saved automatically to the microSD memory card which is present within the reader at the time that the screen capture is commanded. If you check the root level directory of your chart card, then you will likely find that it has been saved there.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)