Raymarine forum / Raymarine Forums / Multifunction Displays v / [LW] [LW11] Axiom wind angle

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Axiom wind angle
07-08-19, 02:56 PM (This post was last modified: 07-09-19 06:37 AM by Louise - Raymarine - Moderator.)
Post: #1
Cagreen Offline
Junior Member
**
 		Posts: 1
Joined: May 2019
Reputation: 0
[LW11] Axiom wind angle
After installing a new Axiom 9 it seems the wind angle is off slightly. Is there an offset setting in the Axiom to correct for that? If not how can this be corrected?
Find all posts by this user
Quote this message in a reply
07-09-19, 07:28 AM
Post: #2
Louise - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 867
Joined: Sep 2018
Reputation: 1
RE: [LW11] Axiom wind angle
Dear Cagreen,

Thank you for the post.

The axiom is repeating information it is receiving from the instrument. In this case it is wind data, there are no calibration functions currently in the Axiom to perform this.

What wind instrument are you using and how is it networked?
What software have you got installed in the Axiom?

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication