Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Power On Reset with new 3.10

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Power On Reset with new 3.10
07-17-19, 11:38 AM (This post was last modified: 07-22-19 03:06 PM by Chuck - Raymarine - Moderator.)
Post: #1
MSjack Offline
Junior Member
**
 		Posts: 35
Joined: Mar 2018
Reputation: 0
[CA11] Power On Reset with new 3.10
Is a power on reset still suggested with the new Bermuda 3.10 software. I am getting really good at reprogramming all my system settings since having to start performing the power on resets after software updates... :)
Thanks
Jack - MS Gulf Coast
Current Ray Equipment - Axiom 7 RV serving as DM and networked to a eS127 -
Quantum Radar via WiFi to eS127, RMK-9 networked to eS127, EV-1 Sensor Core, RV-100 and B60 transducers.
Find all posts by this user
Quote this message in a reply
07-22-19, 03:08 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Power On Reset with new 3.10
MSjack,

Generally, a Power On Reset would not be recommended unless odd behaviors are experienced. However, should one feel comfortable with configuring the MFD's settings, then the reset would provide a known starting point for the support team to duplicate any problem which may be later reported.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication