Raymarine forum / Raymarine Forums / Networking / System Integration v / Raymarine C80

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Raymarine C80
06-08-16, 08:08 AM
Post: #1
joshthefisher Offline
Junior Member
**
 		Posts: 1
Joined: May 2016
Reputation: 0
Raymarine C80
Good day all,

I have attached some pics of the junction where my gps, antenna and I believe transducer meet. Went to use this boat the other day and had no GPS this is what I found. Would appreciate it very much if someone could tell me what to put where. By the way this came from Grady White like this.

[Image: sex2jo.jpg]

[Image: 55f21e.jpg]

[Image: 7330w4.jpg]

[Image: a4wynb.jpg]

Thanks in advance,
Josh
Find all posts by this user
Quote this message in a reply
06-08-16, 03:53 PM (This post was last modified: 06-08-16 03:55 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Raymarine C80
Welcome to the Raymarine Forum Josh,

Please note that the GPS sensor would not be interfaced to a transducer. The black cable shown within the photo does not appear to be of Raymarine origin. This cable will need to be traced to determine what it has been interfaced to. The white cable may be that from a Raymarine GPS Sensor. If so, then please specify which model of Raymarine GPS Sensor has been interfaced to it. Should the assistance of a Certified Raymarine Installer be required, then one may be found here.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication