Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Axiom Pro-S with CPT-S - Losing Depth

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro-S with CPT-S - Losing Depth
08-19-19, 04:16 PM (This post was last modified: 08-27-19 10:09 AM by Chuck - Raymarine - Moderator.)
Post: #1
sberens Offline
Junior Member
**
 		Posts: 4
Joined: Sep 2017
Reputation: 0
[CA11] Axiom Pro-S with CPT-S - Losing Depth
I have an Axiom Pro-S with a Bronze CPT-S transducer. The MFD loses depth readings in multiple situations. Anytime trolling (~2.5 MPH) at depths over ~180 feet, anytime running over ~15 MPH, occasionally trolling (~2.5 MPH) at depths as low as 20 feet. I also do not mark any fish (indicated by an arc on the Axiom Pro screen as it scrolls)...ever. Help, I'm not sure how to investigate or what might be a root cause.
Find all posts by this user
Quote this message in a reply
08-27-19, 11:03 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom Pro-S with CPT-S - Losing Depth
Welcome to the Raymarine Forum sberens,

Please attach a photo of the transducer's identification tag (found on the plug end of the transducer's cable) to this thread. Please additionally attach photos of the underside of the hull in the are of the transducer and from behind the transducer, looking forward. Finally, please specify the make/model of boat on which the CPT-S transducer has been installed.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication