Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] waypoints not in sequence
09-24-19, 04:36 AM (This post was last modified: 09-25-19 01:53 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] waypoints not in sequence
Hi I recently have an axiom 9 with 3.10.42 sw version.

When I create a route, and after, I insert a new waypoint in between, the waypoints are not automatically renumbered.

So this new waypoint have a number not in sequence with the previous, and this may cause confusion.
Find all posts by this user
Quote this message in a reply
09-25-19, 04:49 AM
Post: #2
RE: [LW11] waypoints not in sequence
Dear sgucci99,

Many thanks for your post.

Any new waypoint will automatically be assigned the next number in the waypoint entry list.

It will not assign itself a waypoint ID that forms into numerical order of the waypoint IDs that are in the route.

I can put this forward as a feature request to the product manager.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
09-29-19, 05:03 AM (This post was last modified: 10-01-19 11:05 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [LW11] waypoints not in sequence
As I wrote in my post, this happens because the waypoints are not linked to the routes. If it shoud be done, the waypoints will always start from the number 1, route by route, and not sequentially numbered, moreover without any possibility to delete the unused old ones. In this moment I reached waypoint n.650!!
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)