[CA] [CA11] 2004 Mainship Pilot 34 Rum Runner Axiom 9

[[email protected]]

I have an Axiom 9, a Raymarine new vhf, and a 300 navigator along with a new AIS700. I have not connected the gps since I have a gps position that is recognized by the axiom, the vhf, and the 300 over a seatalk ng network. I connected the AIS 700 to the seatalk network and thought that it would regognize the position like the other instruments. If i connect the gps to the AIS700 can I avoid two different gps positions? how??
Thanks in advance

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum wlsnow100,

Q. I connected the AIS 700 to the seatalk network and thought that it would regognize the position like the other instruments. If i connect the gps to the AIS700 can I avoid two different gps positions? how??
A. Please note that the AIS700 is not dependent upon nor can it be configured to utilized an external NMEA 2000 / SeaTalk / NMEA 0183 GPS data source for its operation. Like all Class B AIS transceivers, the AIS700 is dependent upon its own internal GPS receiver which requires GPS signal which is gathered via the supplied antenna.