Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] M232 display on MFD
10-24-19, 10:39 AM (This post was last modified: 10-24-19 11:56 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] M232 display on MFD
I currently have an M232 connected to an Axiom Pro 12" display. Several of the manuals display the field of view displayed on the MFD when the camera is on. I don't currently see that field of view displayed on my Navionics charts? Can I get that to display on Navionics chart window?
Find all posts by this user
Quote this message in a reply
10-24-19, 11:57 AM
Post: #2
RE: [CA11] M232 display on MFD
Welcome back to the Raymarine Forum Chief,

Are you seeking to overlay the Chart application with a colored sector indicating the FOV of the thermal camera?
Find all posts by this user
Quote this message in a reply
10-27-19, 07:35 PM
Post: #3
RE: [CA11] M232 display on MFD
Yes, exactly.

John
Find all posts by this user
Quote this message in a reply
10-28-19, 08:07 AM
Post: #4
RE: [CA11] M232 display on MFD
John,

Within MFDs running the latest available LH3 software, the camera's FOV may be graphically layered within the chart application via the command sequence MENU->SETTINGS->LAYERS->FOV. However, the FOV layer option will not be accessible unless the system includes an AR200 Augmented Reality Sensor.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)